after owning some yapanese and european cars, my first real car.
Equipment:
motorola gm380 vhf remote mount
motorola gm1280 uhf remote mount
midland alan 48 cb
kathrein vhf antenna
kathrein uhf antenna
sirio turbo5000 cb antenna
federal signal as422/6s siren and light controller
whelen edge 9m with smart arrow messenger
golight 2020 searchlight
Light control box
gm remote units and cb booster
hope you like the install
1994 ford explorer sport install (pics)
Moderator: Queue Moderator
- michiel sanders
- New User
- Posts: 32
- Joined: Fri Nov 02, 2007 2:00 pm
- What radios do you own?: astro saber, gp380, xts3000
1994 ford explorer sport install (pics)
GP380 EX Uhf, GP340 EX Uhf, GP340 Uhf, GP1280 Uhf
Astro Saber I Uhf, Xts3000R I Vhf
Saber III Uhf, Saber III Vhf
GM1280 Uhf, GM380 Vhf
Stornophone CQF9000 Uhf
Astro Saber I Uhf, Xts3000R I Vhf
Saber III Uhf, Saber III Vhf
GM1280 Uhf, GM380 Vhf
Stornophone CQF9000 Uhf
Re: 1994 ford explorer sport install (pics)
michiel sanders wrote:after owning some yapanese and european cars, my first real car.
Equipment:
motorola gm380 vhf remote mount
motorola gm1280 uhf remote mount
midland alan 48 cb
kathrein vhf antenna
kathrein uhf antenna
sirio turbo5000 cb antenna
federal signal as422/6s siren and light controller
whelen edge 9m with smart arrow messenger
golight 2020 searchlight
Light control box
gm remote units and cb booster
hope you like the install
I would have a concern being able to reach the two control heads way over on the right side of the vehicle by the driver. A consideration should be given to mounting those two control heads above or below the radio under the dash. It sure would be a safer operation that trying to lean way over to get to those control heads and the mic between them.
Re: 1994 ford explorer sport install (pics)
In addition to the remote heads mentioned above, get rid of all of the excess cable and wiring in the various boxes (light control and radio box). No need for the loops of extra power cable, extra control cable, etc., also, label both ends of every cable, it will make upgrading and trouble shooting easier. I also presume the cable are unprotected when they leave the boxes? Invest in some split loom to protect everything.
Other than that, it looks good, just needs cleaned up a bit.
Other than that, it looks good, just needs cleaned up a bit.