USB to Serial Adaptor that works

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
e911
Posts: 19
Joined: Sun Feb 03, 2013 5:57 pm
What radios do you own?: XTS3000, Icom V82, Icom U82

USB to Serial Adaptor that works

Post by e911 »

Not really sure where to post this, however I figured I'd post it here for other's information. I have a Belkin USB to Serial Adaptor that I typically use for my Cisco Systems equipment. I figured I'd try it out on my radio cable and much to my surprise, it works.

The model Number is F5U409 and I'm using the windows xp 32bit drivers, flow control set to none, under advanced options: use FIFO buffers (disabled) and com port set to #1. A system reboot was required in order to make the system pick everything up.

Hope someone finds this helpful.
RIP Brothers Tim McCormick (24) and Cody Medley (22)
EOW 02/16/2013
Indianapolis Emergency Medical Services
Killed while on duty by a distracted driver
Top
Post Reply

Return to “Radio Programming”