Batboard

Hey all,

I bought an MCS2K off the fleabay. The prior owner was nice enough to hack off the female portionof the 6 pin molex for the rear head's amplified speaker. I have 3 wires exposed on either side of the "wound": Orange, Green, and Blue. The Orange/Green wires are roughly 14ga, and the Blue one is 24ga or so.

I have searched through the 'WTF is this wire' threads and cant find a wiring plan for the cable that includes the Orange and Blu wires. I am sure they are for the audio to the rear amplified speaker and volume controls thereon, but a little more specific info would be lovely.

Thanks in advance!

your correct. I dont have the cable in front of me but can check this weekend. The rear head uses an amplified speaker with a volume control as the volume on the head is not used. I am thinking 1 should be power, ground and audio. Did you look at any with a VOM ?