I programmed it but do not understand why the disabled light keeps blinking...
The blinking Red LED "Disabled" means:
Blinking RED= Repeater in self-test mode.
XPR8400 Repeater Stuck in Disabled Mode
Moderator: Queue Moderator
Re: XPR8400 Repeater Stuck in Disabled Mode
The problem is in the ethernet card, IC card should be pifado this, it happens followed when there is no protection at ETH network.
Replace C or ethernet card that works normally.
Replace C or ethernet card that works normally.
-
- Posts: 34
- Joined: Mon Sep 29, 2014 2:08 am
- What radios do you own?: HT1250 EX600XLS CDM1250 CP200
Re: XPR8400 Repeater Stuck in Disabled Mode
It's Not using Ethernet at all