MCS2000 wont start up
Moderator: Queue Moderator
-
- New User
- Posts: 3
- Joined: Tue Feb 21, 2012 7:34 am
- What radios do you own?: Motorola
MCS2000 wont start up
My department has a Motorola MCS2000 Model III, with the remote head mounting. Unfortunately, the radio will not power up. I have tested all leads and wiring running to the radio and they have adequate power. Does anyone know why the radio will not power up, or if anyone had issues like this in the past? The radio is in a Chevy Tahoe thats used every now and then. The radio was in fine working order until this problem arose. We now have a brick sitting there. We are looking into new radios, but if we can avoid that cost any help would be great. Thank you in advance.
Re: MCS2000 wont start up
Ignition sense ?
Re: MCS2000 wont start up
Like Will said, it might be set up to power up with the ignition key feed.
Have you checked to make sure the accessory connector is connected to the radio?
Is there power on the wire coming from the ignition that goes to the accessory connector when the engine is running?
Jim
Have you checked to make sure the accessory connector is connected to the radio?
Is there power on the wire coming from the ignition that goes to the accessory connector when the engine is running?
Jim
Re: MCS2000 wont start up
Open it up and check the 5v regulator - known to need a re-flow of the solder....