Batboard

OK forgive me but I am new to DMR.
For a repeater amp on UHF will an amp
From a analog repeater work. I have a XPR 8300
and would like to have it at a 100w. I have a Henry
from my analog repeater here on the shelf can I use it.
If not any recommendation.
Thanks
Doug

The XPR8300 repeater always transmits on both time slots when keyed, so any amp that works with analog will work fine.
Dr.

Thanks I will try it.
Doug

I had tested 20 years old Andrew Bi-Directional Amplifiers in an underground project with Motorola DR3000 (XPR8300) repeater in digital mode and it worked without any problem. I also used some cheap low noise amplifiers (LNA) in head-end units with Motorola DMR repeaters in digital mode. Two slots, no problem. FYI.