Hello all,
Looking to get some thoughts, comments, nasty comments on the JMA/PPC press on connectors for AVA, LDF style cable. I have seen and used the rigid propress gun with these connectors one time on a friends project. I was mildly impressed with the speed to which the connector installed, easy prep, and seemed you could hang from the connector once installed. He remarked that the connection type was inherently low pim from the style and applications, however I am looking for input.
I have noticed that the newer AVA cable, over the LDF is cheaper construction, and I certainly am not liking the newer style connectors. At this point the RFS cable/connectors seem to be higher quality over the commscope. I am getting tired of buying prep tools, and stocking a boat load of connectors for all styles of cable.
Is it time to change over to the JMA stuff?
PPC/JMA press on connectors for hardline
Moderator: Queue Moderator
Re: PPC/JMA press on connectors for hardline
Haven't seen them yet. I have been burnt by the difference between AVA and LDF connectors on the wrong cable. And I have noticed AVA cable uses thinner materials.