MIP5000 Audio Question
Posted: Wed Jun 17, 2015 8:39 am
Have a 7 channel MIP5000 2 digital consolettes and the other 5 channels are tone
it is setup with primary channel on select speaker on digital 1 monitor speaker 1 is diagital 2,
mon spkr 2 is analog 1
mon spkr 3 is analog 2
mon spkr 4 is analog 3
and other 2 channels go to unselect speaker
the issue we are having is when we get 2 or more conversations at a time its almost impossible to understand, the audio from 1 channel at a time is pretty good but when more than 1 goes it doesnt work very well,
We had a old centracom button/led that worked great but took up the enitre room and finally bit the dust.
Any ideas on things to Check
it is setup with primary channel on select speaker on digital 1 monitor speaker 1 is diagital 2,
mon spkr 2 is analog 1
mon spkr 3 is analog 2
mon spkr 4 is analog 3
and other 2 channels go to unselect speaker
the issue we are having is when we get 2 or more conversations at a time its almost impossible to understand, the audio from 1 channel at a time is pretty good but when more than 1 goes it doesnt work very well,
We had a old centracom button/led that worked great but took up the enitre room and finally bit the dust.
Any ideas on things to Check