MTS2000 programming questions
Posted: Sat Nov 21, 2015 8:39 pm
I've got a "new to me" MTS2000 that I'm getting programmed with CPS. So far, so good, except for a couple of minor glitches that I hope someone can help me with.
When in Scan List Program mode, how do I actually add or delete a channel from any given list? When I activate the function on a channel that has a slaved scan list, I get the lightning bolt, and the flashing rectangle, and can scroll through the available channels, but ... then what?
When I assign the "Chan/Sub Select" function to a button ... any button ... the radio will not pass the Self Test. Even when no other buttons are programmed at all. I am using the top dial for Zone select, the two-position rotary for keypad lock, and the three position ABC switch for scan, unassigned, and Scan List Program, respectively.
I'm wondering if the two might be related. Any help would be greatly appreciated.
When in Scan List Program mode, how do I actually add or delete a channel from any given list? When I activate the function on a channel that has a slaved scan list, I get the lightning bolt, and the flashing rectangle, and can scroll through the available channels, but ... then what?
When I assign the "Chan/Sub Select" function to a button ... any button ... the radio will not pass the Self Test. Even when no other buttons are programmed at all. I am using the top dial for Zone select, the two-position rotary for keypad lock, and the three position ABC switch for scan, unassigned, and Scan List Program, respectively.
I'm wondering if the two might be related. Any help would be greatly appreciated.