Page 1 of 1
XTS UCM Firmware
Posted: Thu Feb 02, 2017 4:01 pm
by NSPD
What is the latest Astro25 UCM Firmware? I was thinking it was R05.07.xx
But....
I just picked up one of these ex-DC Police XTS5000's on ebay and it has DES-XL/OFB. The UCM Firmware is showing to be R07.11.10 both in test mode and in CPS.
Re: XTS UCM Firmware
Posted: Thu Feb 02, 2017 8:53 pm
by p47r4ck
Latest was 05.07.15 for UCM's.
Any chance you have one of the mystical XTS/XTL MACE's? I remember on P25.ca they claimed that such a beast existed.
Re: XTS UCM Firmware
Posted: Fri Feb 03, 2017 4:21 am
by NSPD
p47r4ck wrote:Latest was 05.07.15 for UCM's.
Any chance you have one of the mystical XTS/XTL MACE's? I remember on P25.ca they claimed that such a beast existed.
Your guess is as good as mine.. It only has DES-XL and DES-OFB. Host/DSP is 11 so it's older.
Re: XTS UCM Firmware
Posted: Fri Feb 03, 2017 5:25 am
by NSPD
Also just to rule it out... I don't see any indications of a Sierra Module in the service menu or CPS... That was my first concern.
Re: XTS UCM Firmware
Posted: Tue Feb 07, 2017 3:54 am
by wavetar
Yes, there are definitely MACE UCMs for X series radios, and they are in the 7.xx.xx firmware range. The last couple of years of XTS5000 production that is what was used, from what I've seen.
Re: XTS UCM Firmware
Posted: Wed Feb 08, 2017 5:57 am
by NSPD
Thanks for the info... I figured it was something weird like that.
Re: XTS UCM Firmware
Posted: Wed Feb 08, 2017 9:35 am
by p47r4ck
wavetar wrote:Yes, there are definitely MACE UCMs for X series radios, and they are in the 7.xx.xx firmware range. The last couple of years of XTS5000 production that is what was used, from what I've seen.
Any chance you happen to know if you can Key-load the newer MACE-style UCM's with a KVL3000, or is KVL3000+/KVL4000 only?
Re: XTS UCM Firmware
Posted: Wed Feb 08, 2017 10:14 am
by NSPD
I will find out when i finish programming, all I have is a T3011DX. FWIW I can keyload my APX's with the T3011DX so I wouldn't think it would be an issue.
Re: XTS UCM Firmware
Posted: Thu Feb 09, 2017 5:23 am
by wavetar
p47r4ck wrote:wavetar wrote:Yes, there are definitely MACE UCMs for X series radios, and they are in the 7.xx.xx firmware range. The last couple of years of XTS5000 production that is what was used, from what I've seen.
Any chance you happen to know if you can Key-load the newer MACE-style UCM's with a KVL3000, or is KVL3000+/KVL4000 only?
I only used 3000+ and 4000, so can't say 100%, but I don't expect it would be an issue.
Re: XTS UCM Firmware
Posted: Thu Aug 16, 2018 5:57 pm
by MattSR
p47r4ck wrote:wavetar wrote:Yes, there are definitely MACE UCMs for X series radios, and they are in the 7.xx.xx firmware range. The last couple of years of XTS5000 production that is what was used, from what I've seen.
Any chance you happen to know if you can Key-load the newer MACE-style UCM's with a KVL3000, or is KVL3000+/KVL4000 only?
The MACE supports PID and CKR keyloading, so you can quite easily load any MACE style UCM or MACE equipped device with anything from a T3011DX right up to a KVL4000.