I have read old posts about this however I am not able to find much information.
Does anyone have the programming pinout for the Minitor VI pager? I know in the past it was fairly easy to rig up a programming interface for the 3, 4, and 5 pagers. I was wondering if anyone has the pinout for programming these pagers. Initially programming cradles were rather cheap however now I am unable to find one that is much short of $100.
Upon reading it seems the 6 uses the prolific USB/TTL signals so it seems to have the same connections as the other pagers did.
Also has anyone figured out the Engineering mode for the PPS?
Thanks.
Minitor VI(6)
Moderator: Queue Moderator
- SteveC0625
- Posts: 467
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: Minitor VI(6)
To date and to the best of my knowledge, there is no Engineering Mode for the Minitor VI PPS.Jtsou wrote:Also has anyone figured out the Engineering mode for the PPS?
"If" it even exists, it is a very closely guarded secret. I have found no evidence of it on the net.