Motorola Astro Spectra W3 No voice tx
Posted: Sun Jul 30, 2017 6:07 pm
Hello,
Recently purchased a Motorola Astro spectra 110w mobile, usedthe diagram listed on this forum in order to make my own w3 control head cable. I've managed to get everything powered up and programmed but seem to be running into a problem.
After freshly programming the mobile everything works completely fine but after a few minutes the transmit audio no longer works and nothing I do fixes it. I've attempted to reprogram the radios and it will no longer send audio even after a fresh codeplug is put in.
The radio mdc ID will go through and all other functions work but the audio verbal transmission audio will not go through.
Also unnoticed that after the tx stopped working the power Ignition sense no longer has an effect and the radio only turns on when the B+ is connected is connected.
Would greatly appreciate any help.
Thank you!
Recently purchased a Motorola Astro spectra 110w mobile, usedthe diagram listed on this forum in order to make my own w3 control head cable. I've managed to get everything powered up and programmed but seem to be running into a problem.
After freshly programming the mobile everything works completely fine but after a few minutes the transmit audio no longer works and nothing I do fixes it. I've attempted to reprogram the radios and it will no longer send audio even after a fresh codeplug is put in.
The radio mdc ID will go through and all other functions work but the audio verbal transmission audio will not go through.
Also unnoticed that after the tx stopped working the power Ignition sense no longer has an effect and the radio only turns on when the B+ is connected is connected.
Would greatly appreciate any help.
Thank you!