Page 1 of 1
Quantar 2nd V.24 Port
Posted: Sun Jun 06, 2021 9:54 pm
by mutantblue
On a Quantar with a V.24 daughter card, is it possible to use Port 2? I realize that an 8-Wire WIB is needed to interface with the second port circuitry of the daughterboard, but even with the 8-Wire board, I haven't been able to utilize Port 2. Is there any way around this, or is Port 2 only useable on an ASTROTac Comparator?
Re: Quantar 2nd V.24 Port
Posted: Fri Jul 30, 2021 1:14 pm
by wa6ylb
Its only used on the comparator board.
Re: Quantar 2nd V.24 Port
Posted: Sun Aug 01, 2021 9:59 am
by mutantblue
wa6ylb wrote: ↑Fri Jul 30, 2021 1:14 pm
Its only used on the comparator board.
Thanks Byron. That's what I'd come to believe. I first found that a 4-Wire Wireline board didn't pick-up the hardware interfaces. I then proceeded to get an 8-Wire board that did interface to the second port on the V.24 board, but didn't see anywhere in the RSS that would allow it's use. So much for my grand scheme.