GTX Codeplug
Moderator: Queue Moderator
GTX Codeplug
Working on a project to convert a GTX900 to Amateur, seems the codeplug is too new for my software, does anyone have an older codeplug I can use to get up and running.
Thanks in advance...
-- JC.
Thanks in advance...
-- JC.
- n_zero_ndp
- Posts: 330
- Joined: Mon Feb 25, 2002 4:00 pm
Re: GTX Codeplug
What software version are you using???grinthock wrote:Working on a project to convert a GTX900 to Amateur, seems the codeplug is too new for my software, does anyone have an older codeplug I can use to get up and running.
Thanks in advance...
-- JC.
The EDACS DΩRK......
900mhz troubles
I am now able to talk to this radio, i've programmed in the national call frequency 904.5 however when I key up the radio seems to do nothing at all...
Thoughts?
Thoughts?
Re: 900mhz troubles
You may want to check on that, I always thought 906.500 was the FM calling frequency.grinthock wrote:I am now able to talk to this radio, i've programmed in the national call frequency 904.5 however when I key up the radio seems to do nothing at all...
Thoughts?
10-95
- n_zero_ndp
- Posts: 330
- Joined: Mon Feb 25, 2002 4:00 pm
Re: 900mhz troubles
As far as I know, the GTX is deaf at 904.5 (or 906.5 for that matter). It will TX there but it is incapable of hearing down there.grinthock wrote:I am now able to talk to this radio, i've programmed in the national call frequency 904.5 however when I key up the radio seems to do nothing at all...
Thoughts?
Please see this thread about the GTXs specs that were found by "r0f"
http://batboard.batlabs.com/viewtopic.php?t=21222
The EDACS DΩRK......
GTX900 and GTX800
OK ... so now what about the specs of the GTX800 ???
at least the recive ??
at least the recive ??
- n_zero_ndp
- Posts: 330
- Joined: Mon Feb 25, 2002 4:00 pm
Re: GTX900 and GTX800
Don't quote me, but the 800 GTX is something like 850 to 866 on the RX side. Just tried to enter a freq above 866.0000 & it will not accept it. Yes, you could hack it to accept a higher freq, but it will not perform well at all.Seth wrote:OK ... so now what about the specs of the GTX800 ???
at least the recive ??
The EDACS DΩRK......
gtx 900
You are not going to get the GTX to work on anything but the 25 mhz split. Tx on 902 and receive on 927. I have programed several and they work there just fine. They do not receive very well below 927.
Walt
Walt
GTX800
Well iv got all the equipment to read and wright to GTX .. so i guess ill see just how far up a GTX800 will recive .... but with out a signal generator ... that probably will be hard to do ...
n_0_ndp ... i was thinking of just using the gtx800 for recive only... for a repeater ... unless some one knows of a fairly cheap rig/radio that will recive in the lower portion of 902
n_0_ndp ... i was thinking of just using the gtx800 for recive only... for a repeater ... unless some one knows of a fairly cheap rig/radio that will recive in the lower portion of 902