Batboard

hey guys, I am sorry to hear about the loss, as good contributers and good people are very hard to finds these days, but I have a problem and maybe I could get some help from you guys, I have an ICOM IC-F21 16 ch UHF prep and need to program it, does anyone have the programming software or know someone who has the soft ware, this is a great prep and I would like to use it, we just had it programmed in the bussiness section where I used to work. thanks in advance for any and all help you can supply me with. Jason

I would imagine you could contact Icom or your local Icom dealer to get the necessary software and cabling. Icom's prices for their software are generally reasonable (unlike Motorola), and I've never had a problem purchasing software for any of my 4 different Icom radios.

A little googling turned up this link, which would suggest that the software you need is going in the 60-80 range these days:

http://store.yahoo.com/nsiradio1/icprpa.html

Again, contact your local Icom dealer for more info. You can look up info on their website at http://www.icomamerica.com

Hope this helps