GTX internal speaker

This forum is for the discussions targeted at converting various models of Motorola equipment to operate in the 900MHz Amateur Band.

Moderator: Queue Moderator

Post Reply
Seth
Posts: 43
Joined: Tue Apr 27, 2004 7:12 pm

GTX internal speaker

Post by Seth »

Does any one have pics of the placements of the componets that are to change the Pin 13 Configuration ???
User avatar
kcbooboo
Batboard $upporter
Posts: 2117
Joined: Wed May 01, 2002 9:03 am

Post by kcbooboo »

The short answer is: you don't really want to go there !

The next question is: why?

I looked this stuff up once. I think some/all of the parts were underneath the board, and they are TINY ! While I could scan the important section of the schematic and the board layout, I can tell you that it's not easy to follow the traces when they intersect and run underneath component outlines. At least the components are labelled.

If you still want the info, send me an e-mail address via PM and I'll get something out Sunday. The files could be several hundred kb each, so if you're on a dial-up line, you might not want them.

Bob M.
Post Reply

Return to “Converting Motorola Equipment to 900MHz Amateur”