Minitor V Programming Question

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
Asst17-1
Posts: 30
Joined: Sat Aug 06, 2005 4:53 am

Minitor V Programming Question

Post by Asst17-1 »

I have a question on programming.... as I am not too fimiliar with it...

If I set stored voice to dynamic and revert N to 10 seconds, should the SV keep recording as long as there is a carrier? It seems that if I do this the recording stops after 10 seconds even if there is a transmission.

also, what would happen if i set recording to 30 seconds and revert N to 5 seconds, it should not record if there is no transmission within those 5 seconds?

i guess my question is does it stop recording at the time I have the Revert N set to.

I don't have the software in front of me ATM so i hope this makes sense

THX
jmr3865
2 Warnings for RSS/CPS Wanted/For Sale
Posts: 1015
Joined: Fri Dec 17, 2004 11:33 am
What radios do you own?: KW tk2170, tk730, etc.

Post by jmr3865 »

if the transmission drops after the delayed N time, NO. If the transmission stops before the delayed N time, it will still record to that delayed N time. What you stated was incorrect.
JMR
KC2QVO
Post Reply

Return to “Motorola Digital and Voice Paging”