Ht-1250 problem

rescuelt · Post by **rescuelt** » Tue Oct 04, 2005 6:58 am

I am having a problem with my ht1250 not filtering out the pl tone on some channels, I have it set properly for the pl but you can here it buzzing when traffic is coming through. Any ideas?

Post by **HumHead** » Tue Oct 04, 2005 1:46 pm

Are you also using MDC1200 on the channels with the buzz? If so, it is a known issue with the default baseband offset tuning values.

You can read more about it here:

http://batboard.batlabs.com/viewtopic.php?t=5241

KG4LHQ · Post by **KG4LHQ** » Sat Oct 08, 2005 1:31 am

Where do you get a cable to do the tuning side of the radio... I have a Ebay Ribless Cable - Will those work for the tuning software?

commtek · Post by **commtek** » Sat Oct 08, 2005 8:46 am

Can't speak for the Ebay cable, as some are not of the best quality, but you do use the same cable for programming and tuning.

Change the baseband tuning, and that should solve your problem.