Page 1 of 1
Systems Saber RSS Problem
Posted: Sun Jan 08, 2006 10:42 am
by NSPD
Using Systems Saber RSS version 4.00.02, sometimes the RSS will not open at all and just leaves a blank black screen and sometimes it will load and then freeze. Has anyone had this same problem, and does anyone know of a fix for it?
Thanks!
Posted: Sun Jan 08, 2006 12:12 pm
by wavetar
Blank black screen...are you running it in DOS, or through a Windows Command Prompt?
Todd
Posted: Sun Jan 08, 2006 12:16 pm
by NSPD
I'm running under Windows XP command prompt.
I'm not trying to program the radio, just work on a codeplug.
Posted: Sun Jan 08, 2006 2:59 pm
by NSPD
Well I got that solved by using a slower computer..
Next question..
Is there a way to have MDC PTT ID on some channels and not on others? I have it set as Post-PTT ID and it seems to be radiowide. I only use MDC on 6 channels, and I really don't need or want it on the rest. Is there a way to turn it off?
Posted: Sun Jan 08, 2006 4:12 pm
by wavetar
NSPD wrote:I'm running under Windows XP command prompt.
I'm not trying to program the radio, just work on a codeplug.
Ah, that's why...certain RSS won't run properly in a 2000/XP command prompt. I use a little program called dosbox, which emulates DOS within Windows. It's fantastic for working on codeplugs under 2000/XP, or for playing those old DOS games which also have problems in a command prompt. You can download it here:
http://majorgeeks.com/DOSBox_d4381.html
Todd
Posted: Mon Jan 09, 2006 5:49 pm
by dbusse
Todd-
Can you read/write radios using the DOSBox software?
Dan
Posted: Mon Jan 09, 2006 6:56 pm
by Osprey
Not under windows.
Posted: Tue Jan 10, 2006 4:51 am
by wavetar
dbusse wrote:Todd-
Can you read/write radios using the DOSBox software?
Dan
I've tried just for the hell of it, but I haven't been able to...there's settings in the config files to enable the serial port & whatnot, but they don't seem to have any effect one way or the other. Perhaps it's for future versions.
Anyway, I don't use or condone the use of it for reading/writing radios. I strictly use it for working with codeplugs for certain RSS such as LCS & Spectra, which just give blank screens under 2000/XP command prompts. Saves me rebooting the computer into DOS, or having to pull out another one.
Todd
Posted: Wed Jan 11, 2006 10:08 am
by RKG
In my SSs, PTT-ID is selectable on a per channel basis. However, you are limited to one MDC system per radio: you can have the radio ID or not per channel, but if it IDs it IDs with the same value on all IDing channels.