NMN6225 telco plug pinout

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
MotoRadioMan
Posts: 65
Joined: Fri Oct 19, 2001 4:00 pm
What radios do you own?: /\/\

NMN6225 telco plug pinout

Post by MotoRadioMan »

I am working on a little project here, and I am wondering if anyone knows what the pinout looks like on the RJ-45 end of the NMN6225. I have a couple NMN6217s, and lucked into a few brand new Saber replacement speaker mic cables. I want to put the two together. Just for giggles, I did swap the mic. head off the '6217 with one from a Jedi NMN6193, to see if it worked. It does, thus, my belief is the only difference is the cable, on any of these mics.

Long story short, I want to re-cable the mic head I have (6217) with the Saber cable so it will work with my analog Sabers as well as the ASTRO radios. I have the pinout for the NMN6217, if anyone wants it.

Thanks in advance guys,
A. D.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”