Minitor V 5 power supply

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
sgreene
New User
Posts: 1
Joined: Wed Mar 19, 2008 1:23 pm

Minitor V 5 power supply

Post by sgreene »

Hi All,

Does anybody know where I can get the wall adapter/power supply for the Minitor V charging stand? I already have the stand just need the plug. Is there anyway I can buy one from Radioshack instead Motorola's over priced pos? Thanks.

Seth
User avatar
Tom in D.C.
Posts: 3859
Joined: Tue Sep 04, 2001 4:00 pm
What radios do you own?: Progreso soup can with CRT

Re: Minitor V 5 power supply

Post by Tom in D.C. »

Take the charger stand to the Rat Shack. In the past their
wall wart/removable plug combinations have been polarity
reversible, so you should be able to mix and match to get
the connector you need. You do need to know/figure out
the correct plug polarity and the current requirements
before you connect anything that's hot.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: Minitor V 5 power supply

Post by escomm »

no fishy reverse polarity plugs here like with the SmartRIB, wall wart from radio shack will work just fine as long as it can supply the necessary current
Post Reply

Return to “Motorola Digital and Voice Paging”