Minitor IV

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
brownie105
New User
Posts: 1
Joined: Sun Aug 19, 2007 1:31 pm

Minitor IV

Post by brownie105 »

Hi,

Reprogrammed Minitor IV pagers. Had to switch bandspilts from #3 (165.885) down to #2 (152.345) which was successfully done. I tried the pager and I get nothing. If I put a higher freq in the same spilt it works fine.

Rumor out there I will have to completely change my RF board, does anyone know if that is neccessary.

Thanks
Top
tvsjr
Posts: 4118
Joined: Fri Nov 28, 2003 9:46 am

Re: Minitor IV

Post by tvsjr »

VCO's out of lock. You can cheat a little... but not 10MHz. You'll need to replace the RF deck or replace the pager.
Top
Post Reply

Return to “Motorola Digital and Voice Paging”