Minitor II Crystal Change

This forum is focused on discussing Digital and Voice paging equipment, protocol's, infrastructure, and Motorola specific hardware used. Please refrain from discussing different ways to monitor the digital paging systems due to the legalities of such.

Moderator: Queue Moderator

Post Reply
hvwebster
New User
Posts: 1
Joined: Thu Jan 15, 2009 4:59 am

Minitor II Crystal Change

Post by hvwebster »

I have a UHF Minitor II on 460.400. However, I'd like to change this to 462.975. If I have the crystal for 462.975, how tough is a do it yourself crystal change?
Top
User avatar
Andy Brinkley
Batboard $upporter
Posts: 376
Joined: Mon Sep 03, 2001 4:00 pm
What radios do you own?: FMR80D and a Motrac with Scan

Re: Minitor II Crystal Change

Post by Andy Brinkley »

First off welcome to the forum.

If you have a soldering station, service monitor, service manual and the knowledge and skill then it's a piece of cake.

Otherwise I would recommend getting some one here on the board to install it and properly tune and align the pager.
Andy / NC4AB
Top
Post Reply

Return to “Motorola Digital and Voice Paging”