POLARIS USA BOX??
Moderator: Queue Moderator
POLARIS USA BOX??
My old rib boz of 15 years is dead
i used it for my HT1000
Question is the poaris rib boxes good when it comes to programming the HT1000''s
i used it for my HT1000
Question is the poaris rib boxes good when it comes to programming the HT1000''s
I HAVE BEEN IN THE EMS FIELD FOR OVER 15 YEARS..I ENJOY MOTOROLA EQUIPMENT..HANDHELDS ARE THE BEST!!!!!!!!!!!!!--HT 1000 SEIES!!!!!!!!
Re: POLARIS USA BOX??
I still repair Motorola RIB's.
The Polaris box may not work on some Motorola radios.
The Polaris box may not work on some Motorola radios.
Re: POLARIS USA BOX??
What about the HT 1000 SERIES
I HAVE BEEN IN THE EMS FIELD FOR OVER 15 YEARS..I ENJOY MOTOROLA EQUIPMENT..HANDHELDS ARE THE BEST!!!!!!!!!!!!!--HT 1000 SEIES!!!!!!!!
Re: POLARIS USA BOX??
Any idea where i can get a rib other then motorola
I HAVE BEEN IN THE EMS FIELD FOR OVER 15 YEARS..I ENJOY MOTOROLA EQUIPMENT..HANDHELDS ARE THE BEST!!!!!!!!!!!!!--HT 1000 SEIES!!!!!!!!
Re: POLARIS USA BOX??
The Motorola rib is the most efficient interface, any brand of radio program
100% repairable by your technician
Take photos of both sides without covers
the most common flaw is the battery contacts
and Zener diodes (damper) input and output to radio
is easier to fall through cables to PC o RIB to radio.
eulalio
100% repairable by your technician
Take photos of both sides without covers
the most common flaw is the battery contacts
and Zener diodes (damper) input and output to radio
is easier to fall through cables to PC o RIB to radio.
eulalio
trentininelmondo
Re: POLARIS USA BOX??
The only radio I have had issues with the Polaris box is the MCS2000. It is very sensitive to low voltage
and generally doesn't work with my Polaris box.
Jim
and generally doesn't work with my Polaris box.
Jim
BNN123 wrote:My old rib boz of 15 years is dead
i used it for my HT1000
Question is the poaris rib boxes good when it comes to programming the HT1000''s
Re: POLARIS USA BOX??
there use to be a place in az called aircom anyone have the phone number??? or website???
Re: POLARIS USA BOX??
Anyone on the board know of a place i can get a rib box other then ebay or polaris usa
- Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: POLARIS USA BOX??
Do a Google search for MOTOROLA RIB BOX and you'll come up with several sources for cheap
RIB boxes, also for the real Motorola boxes.
RIB boxes, also for the real Motorola boxes.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
-
- Posts: 1854
- Joined: Tue Jan 13, 2004 7:03 am
Re: POLARIS USA BOX??
I used a Polaris PA-II RIB for a few years. It programmed HT1000s and others from the Jedi line with no complaints or issues.
The only radio it didn't like was the M1225, and it did that abruptly after working great for the whole time I had it.
The only radio it didn't like was the M1225, and it did that abruptly after working great for the whole time I had it.
Re: POLARIS USA BOX??
The Polaris box doesn't play well with the Sabers, also.
For an aftermarket rib, I highly recommend the Sandy Ganz design. You can get them at www.radiostew.com
For an aftermarket rib, I highly recommend the Sandy Ganz design. You can get them at www.radiostew.com
Re: POLARIS USA BOX??
Interesting, in that I used my Polaris PA-III RIB for many years with Sabers, System Sabers and Astro Sabers with 0 problems. In what way has your experience indicated to you that they don't work well with Sabers?commtek wrote:The Polaris box doesn't play well with the Sabers, also.
For an aftermarket rib, I highly recommend the Sandy Ganz design. You can get them at http://www.radiostew.com
Re: POLARIS USA BOX??
It bricked one when writing to it. Reads OK, though. Same DOS computer that is used with anything else I program.
Re: POLARIS USA BOX??
My Motorola RIB just broke down during a large programming job. Would like to purchase another OEM box. Are there models other than the RLN4008 ?
Jim
Jim
Re: POLARIS USA BOX??
RLN4008E is the current version with surface mount components. The easiest to repair is the RLN4008B if you can find one. Or you can get the more expensive SmartRIB RLN1015C for programming (just as the rib) or for flash upgrades.a1emt wrote:My Motorola RIB just broke down during a large programming job. Would like to purchase another OEM box. Are there models other than the RLN4008 ?
Jim
Dave
Re: POLARIS USA BOX??
Thanks
Re: POLARIS USA BOX??
do it yourself, actually works with motorola, k, i, v, s, etc.
[/img][URL=http://img12.imageshack.us/my.php? ... .jpg[/img]
[/url]
[/img][URL=http://img12.imageshack.us/my.php? ... .jpg[/img]
[/url]
trentininelmondo