Whelen m series question
Posted: Sun Aug 30, 2009 3:18 pm
We are converting our fleet to all whelen m series lightheads using m4's and m9 lightheads, all with split lighthead colors and clear lenses. As such the initial install of that many lightheads with so many internal flash patterns creates a lot of time consuming work. Also over time some whelen light heads with internal flashers seem to lose their settings. This leads one to wonder if it is possible to flash these lightheads on a flasher? I know they can be synchronized but it would be easier and more effective if we could simply use a cheap led flasher and bypass the internal flashers. While I am very fond of the m series, the number of flash combinations these come with has gotten out of hand.
Another option that had crossed my mind was setting each half of the lighthead to solid burn and then alternating the power to the lights using a flasher.
If that isn't possible, does anyone know of a way to mass program these so our mechanics can save some te and their retinas? All creative ideas will be appreciated.
Thanks,
Jared Cosper
Montgomery County Hospital District - EMS
Another option that had crossed my mind was setting each half of the lighthead to solid burn and then alternating the power to the lights using a flasher.
If that isn't possible, does anyone know of a way to mass program these so our mechanics can save some te and their retinas? All creative ideas will be appreciated.
Thanks,
Jared Cosper
Montgomery County Hospital District - EMS