Hi all,
I have been on the side lines learning lots thank you. I thought I would share my install in my
Ford Falcon XR6 (Australia) install. It consists of:
Motorola XTVA
XTS3000
HHCH
Speaker
and glass mount antena.
The XTVA is hidden away under the passangers seat out of site.
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
Install Ford Falcon FG XR6 (Aust)
Moderator: Queue Moderator
-
- New User
- Posts: 2
- Joined: Sat Apr 10, 2010 3:18 am
Re: Install Ford Falcon FG XR6 (Aust)
damofordfestival wrote:Hi all,
I have been on the side lines learning lots thank you. I thought I would share my install in my
Ford Falcon XR6 (Australia) install. It consists of:
Motorola XTVA
XTS3000
HHCH
Speaker
and glass mount antena.
The XTVA is hidden away under the passangers seat out of site.
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
http://picasaweb.google.com.au/lh/photo ... directlink
Didn't the antenna instructions say anything about not mounting the glass mount over the heater strip on the window?
-
- New User
- Posts: 2
- Joined: Sat Apr 10, 2010 3:18 am
Re: Install Ford Falcon FG XR6 (Aust)
It sure did, but the Ford XR6 has a square marked area at the top centre of the rear window with no heater strips which is specially made to mount a cellular/glass mount antena, so no probs with any heater strip running under the mount.