ok guys im in need of some expert help here, I have been reading the forums on astro stuff since 1030 pm and its now 330 am im new to the astro line and have rather become a big fan, but im not sure of all the flashcodes and such, i have learned quite alot by browsing the board looking for the answers, so if i can get this one answered i would appericate it
ok here it is xts 5000 f/c 509008-001687-0 this radio does not do mcd or qc-II is that correct? if so can it be flashed to do so?
the other is an xts2500 f/c 5a1018-10178c-5 again this radio does not have mcd or qc-II is this correct? and can this one be flashed to do so,
jeffrey
xts5k and 2k flashcode questions
Moderator: Queue Moderator
- J_L_COHEN
- Posts: 121
- Joined: Thu Dec 13, 2001 4:00 pm
- What radios do you own?: Xtl5000 apx7000 Cdm1550,Ht1250
xts5k and 2k flashcode questions
Jeffrey Cohen
Captain/Communications Officer
Newton Township Fire & Ems
Zanesville, Ohio
! SMOKE DETECTORS SAVE LIVES !
Captain/Communications Officer
Newton Township Fire & Ems
Zanesville, Ohio
! SMOKE DETECTORS SAVE LIVES !
Re: xts5k and 2k flashcode questions
Both radios will do MDC-1200 signaling even if the flash codes were only H35 conventional only.
The QCII is available on the XTS5000 after HOST 9 if I am not mistaken?Not sure on the firmware version needed on the XTS2500.The QCII is a standard option on both radios.
The QCII is available on the XTS5000 after HOST 9 if I am not mistaken?Not sure on the firmware version needed on the XTS2500.The QCII is a standard option on both radios.
In Memory of those that serve.
Seal Team Six
Radios I currently own:
2-qty APX7000 UHF R2/700-800MHz M3
Seal Team Six
Radios I currently own:
2-qty APX7000 UHF R2/700-800MHz M3
Re: xts5k and 2k flashcode questions
QCII needs Host R08.00.00 or higher to work.. This applies to the entire Astro25 line..
-Marc
-Marc
Stupidity creates job security!
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..
CPS = Customer Programming Software, Not CPS Software.
- J_L_COHEN
- Posts: 121
- Joined: Thu Dec 13, 2001 4:00 pm
- What radios do you own?: Xtl5000 apx7000 Cdm1550,Ht1250
Re: xts5k and 2k flashcode questions
Awsome Thanks Guys!,
Jeffrey Cohen
Captain/Communications Officer
Newton Township Fire & Ems
Zanesville, Ohio
! SMOKE DETECTORS SAVE LIVES !
Captain/Communications Officer
Newton Township Fire & Ems
Zanesville, Ohio
! SMOKE DETECTORS SAVE LIVES !