Ok I'm confused. Programming this for some one.
Have an HT1000 "D" model but it won't take the following freqs:
155.9175 and 156.0375
It rounds them off to a nearest freq.
Any one have any clues? Maybe older firmware? I never ran into this before. Although these are new frequencies to me.
Thanks
Pete
HT1000 D model issue with 2.5 steps
Moderator: Queue Moderator
-
firetech792
- Posts: 153
- Joined: Mon Aug 16, 2004 12:08 pm
-
MTS2000des
- Posts: 3347
- Joined: Sat Jan 04, 2003 4:59 pm
- What radios do you own?: XTS2500, XTS5000, and MTS2000
Re: HT1000 D model issue with 2.5 steps
I just checked using HT1000 RSS V3.03 and two codeplugs of early 1998 vintage DN HT1000's (both have V4.0 F/W) and no problem entering either frequency. What version of HT1000 RSS are you using?
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
-
firetech792
- Posts: 153
- Joined: Mon Aug 16, 2004 12:08 pm
Re: HT1000 D model issue with 2.5 steps
My RSS version is a 2.00
Radio is 4.02
Guess my RSS might be the issue. Thanks.
Radio is 4.02
Guess my RSS might be the issue. Thanks.
-
MTS2000des
- Posts: 3347
- Joined: Sat Jan 04, 2003 4:59 pm
- What radios do you own?: XTS2500, XTS5000, and MTS2000
Re: HT1000 D model issue with 2.5 steps
yep, you'll need 3.03 or later to program a DN. I am surprised it doesn't complain and give you the "invalid model, serial number" error and refuse to unpack the codeplug.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
-
firetech792
- Posts: 153
- Joined: Mon Aug 16, 2004 12:08 pm
Re: HT1000 D model issue with 2.5 steps
I do get those warnings some times but I always hit F9, save workspace any way (or something like that)
Thanks again
Thanks again