R2670 analyzer using RS232

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
MikeR
New User
Posts: 3
Joined: Tue Feb 24, 2009 8:58 am

R2670 analyzer using RS232

Post by MikeR »

We need to align 1000+ XTS5000 and XTL5000 radios for use on a new P25 system being installed. We have an autotester for our Aeroflex 3920, but need to get something for our R2670s. Has anyone used this? I made a cable to try to talk to our analyzers, but haven't been successful yet. It looks like the S/W is available from Motorola, but can't get any info from them without actually buying it.
Any replies welcome.

Mike
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: R2670 analyzer using RS232

Post by escomm »

Contact your local GD manufacturer's rep.

www.gdc4s.com/documents/AutoTest_FAQs.pdf
Post Reply

Return to “Test Equipment & RF Equipment Alignment”