Motorola 2024D rf power settings

This forum exists for the purposes for discussing service monitors (This includes but is not limited to Motorola, HP, Aeroflex, GD, etc). Additional topics allowed include test procedures, interpretation of test results, where to find information about specific tests, antenna VSWR, return loss testing, duplexer and filter alignment, etc.

Moderator: Queue Moderator

Post Reply
ve3lau
Posts: 23
Joined: Mon Jun 06, 2005 4:17 pm

Motorola 2024D rf power settings

Post by ve3lau »

need information which boards or pot to set rf power meter output levels

my 2024D seems bit high as compare to calibrated rf meter

Thanks
Top
DJP126
Posts: 873
Joined: Wed Jun 18, 2003 6:41 am
What radios do you own?: What's a radio?

Re: Motorola 2024D rf power settings

Post by DJP126 »

There are no adjustments for the RF output. First, make sure that the shields on the RF Synthesizer (A9) module and the RF Amplifier (A17) module are tight (2" lbs. max). Next make sure your DVM is in proper calibration.
Dave
Top
ve3lau
Posts: 23
Joined: Mon Jun 06, 2005 4:17 pm

Re: Motorola 2024D rf power settings

Post by ve3lau »

Thanks Dave

will check A9 and A17, since i do not have service manual how you check DVM for proper calibration?

Thanks
Top
Post Reply

Return to “Test Equipment & RF Equipment Alignment”