Page 1 of 1
Telex training
Posted: Mon Jan 25, 2010 8:32 am
by Bill_G
I'll be attending a 3 day Telex dealer certification class this week. If you have any specific questions about Telex products, particularly their roip line, post them here and I'll try to get an answer for you.
Re: Telex training
Posted: Tue Jan 26, 2010 10:01 am
by Jim202
Ask them about interfacing Nextel phones onto the radio system. Both PTT and normal phone calls should be addressed.
Jim
Bill_G wrote:I'll be attending a 3 day Telex dealer certification class this week. If you have any specific questions about Telex products, particularly their roip line, post them here and I'll try to get an answer for you.
Re: Telex training
Posted: Tue Jan 26, 2010 8:07 pm
by Bill_G
I've done that already. What would you like to know Jim?
Re: Telex training
Posted: Fri Jan 29, 2010 4:23 am
by Jim202
It is my understanding that they have a 3rd party plug in card that can replicate a Nextel PTT and cellular
type service that can be used in a gateway system or other interface. Do they in fact have this and what
does it take to make the application / interface function with a radio system?
Jim
Bill_G wrote:I've done that already. What would you like to know Jim?
Re: Telex training
Posted: Fri Jan 29, 2010 5:47 am
by Bill_G
No, not that I'm aware of. You use either a falcon class Nextel handheld, or a Nextel data only modem. Those plug into an Telex interface box which in turn plugs into an IP223. They access Nextel service with a Nextel device.
Re: Telex training
Posted: Fri Jan 29, 2010 6:51 am
by Bill_G
From the class - I am very impressed with the US Forestry Service console layout. Simple, informative, undistracting.
Re: Telex training
Posted: Wed Feb 24, 2010 2:20 am
by randymince
How did you like the class? I attended the Dallas,Texas training/cert in September. I am responsible for around 25 IP-223's, some PIB/TID, 6 IP2002's and about 24 csoft users. If you have any questions, suggestions hit me up.
Re: Telex training
Posted: Wed Feb 24, 2010 6:11 am
by Bill_G
Sweet. Thanks Randy. The class was pretty good. After working with the product for a few years, I knew most of it, but I did learn a few things. We've put in quite a few of the Csoft consoles, and so far they are solid. Our biggest issues have been network problems causing broken audio, not hardware or config issues. Seems to go in once. I love that.
Re: Telex training
Posted: Thu Feb 25, 2010 4:18 pm
by wavetar
We've only installed the one system, with 9 IP223's & a couple of PIB's...but zero issues since it went in...best kind of product.